DMX Relais PCB, 6 x 10A, 1 Secure channel, RDM
Product number:
SL3207R-EP
Manufacturer:
SOUNDLIGHT
Length:
110 mm
Width:
86 mm
Height:
75 mm
Weight:
0.5 kg
Product information "DMX Relais PCB, 6 x 10A, 1 Secure channel, RDM"
When there are many loads to be switched on or off, the 3207R-EP RDM may be your favourite choice. The compact DMX controlled relay drives 6x 230V / 10 amps resistive load using potential-free contacts. 6 independenty controllable outputs offer one changeover contact (N.O./N.C.) each. Additonally, the 3207R-EP features a common trigger slot. This allows to trigger all outputs absolutely simultaneously.
The 3207R-EP RDM is best suited for power control applications. Rapid mounting and wiring thanks to screwless cage clamp contacts allowing higher current loads than conventional connectors. Cage clamp connectors provide reliable electrical contact at all times (no screws getting loose), and save wiring costs due to increased speed.
Personality selection is by means of DMX RDM or a by a separate address board. Four personalities allow to select the relay trip points best matching your application:
Hysteresis 1: 50% / 51%
Hysteresis 2: 25% / 75%
Hysteresis 3: 3% / 97%
Hysteresis 4: 0% / 1%
To improve noise immunity, the 3206R-EP RDM uses a special oversampling mode evaluating multiple data packets to ensure safe and reliable switching in worst conditions. Using a standard RDM controller (capable of processiong manufacturer specific PIDs), the relay modules can be reconfigured to subdevice mode. This allows to assign each output its own DMX start address. Additionally, the 3207R-EP features a separate trigger channel (again using its own start address) to trigger all outputs simultaneously. This makes the 3207R-EP your preferred choice for applications like gabucki systems, and more.
DMX RELAY RDM
The 3207R-EP RDM is best suited for power control applications. Rapid mounting and wiring thanks to screwless cage clamp contacts allowing higher current loads than conventional connectors. Cage clamp connectors provide reliable electrical contact at all times (no screws getting loose), and save wiring costs due to increased speed.
Personality selection is by means of DMX RDM or a by a separate address board. Four personalities allow to select the relay trip points best matching your application:
Hysteresis 1: 50% / 51%
Hysteresis 2: 25% / 75%
Hysteresis 3: 3% / 97%
Hysteresis 4: 0% / 1%
To improve noise immunity, the 3206R-EP RDM uses a special oversampling mode evaluating multiple data packets to ensure safe and reliable switching in worst conditions. Using a standard RDM controller (capable of processiong manufacturer specific PIDs), the relay modules can be reconfigured to subdevice mode. This allows to assign each output its own DMX start address. Additionally, the 3207R-EP features a separate trigger channel (again using its own start address) to trigger all outputs simultaneously. This makes the 3207R-EP your preferred choice for applications like gabucki systems, and more.
DMX RELAY RDM
- 6 channel
- DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM
- 6 switching outputs
- 1 additional trigger slot
- changeover contacts (N.O./N.C.), 230V 10amps resistive load
- DMX RDM V1.0 compatible
- 4 DMX personalities
- Power supply: 230V AC, approx. 3,5W
- Dimensions: DIN rail, approx.6,5U
Login