DMX Relay, 12 outputs, DIN
Product number:
SL3212R-H
Manufacturer:
SOUNDLIGHT
Length:
70 mm
Width:
85 mm
Height:
70 mm
Weight:
0.5 kg
Available stock:
7
Product information "DMX Relay, 12 outputs, DIN"
Manufacturer: SOUNDLIGHT
The 3212R-H features high-power N.O. contacts (max. 230V at 6 amps resistive load). This makes the 3212R-H a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options: every combination is possible and can be easily set using your preferred RDM controller.
Configurable parameters include among others: the DMX start adress, the DMX personality (upper and lower trigger intensity), channel allocation, DMX HOLD mode.
To configure the relay 3212R-H, all you need a suitable DMX RDM controller. To set start address and personality, a start address board 3000P can be used alternatively. This is available as optional accessory and is not contained with delivery.
Specifications DMX Relais 3212R-H
The 3212R-H features high-power N.O. contacts (max. 230V at 6 amps resistive load). This makes the 3212R-H a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options: every combination is possible and can be easily set using your preferred RDM controller.
Configurable parameters include among others: the DMX start adress, the DMX personality (upper and lower trigger intensity), channel allocation, DMX HOLD mode.
To configure the relay 3212R-H, all you need a suitable DMX RDM controller. To set start address and personality, a start address board 3000P can be used alternatively. This is available as optional accessory and is not contained with delivery.
Specifications DMX Relais 3212R-H
- 12 channel
- DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM
- 12 switched outputs (N.O.) 230V 6A resistive load (16A max. per block)
- 4 trigger level combinations selectable
- switching speed selectable (DMX RDM controller required for configuration)
- Power supply: 24.0VDC, approx. 20mA (address board 3000P connected, all relays OFF) / 120mA (address board 3000P connected, all relays ON)
- Dimensions: DIN rail, approx. 5 width units
Login