Manufacturer: SOUNDLIGHT2 Relays, switching individually (2 DMX data slots). Switching hysteresis is selectable, either 50%/51%, 3%/97%, 25%/75%, or 0%/1% (idally suited to switch flourescent lights). At loss off DMX control signal, all relays can be set to OFF, or to ON, or the last valid setting can be retained (DMX HOLD). Printed circuit board approx. 70 x 70 mm, without optional DMX start address switch board. Power supply: 12V DC, ca. 150 mA. 24V model available on request.The DMX relay 3202R-EP is DMX RDM comaptible (from version Mk7 onward). The relay can be operated from DMX512/1990, DIN56930-2, DMX512-A or ANSI E1-20 DMX RDM. For more info, pls refer to our website www.rdm.soundlight.de2-channelDMX512/1990, DMX512-A, ANSI E-20 DMX RDM2 switching outputsModel 3202R-EP6: Relay N.O./N.C., 230V 6A resistive LastModel 3202R-EP16: Relay N.O., 230V 16A resistive LastPower supply: 12V DC, approx. 150mADimensions: 70mm x 70mmFAST MODE: Relays operate very fast to drive effects. The SLOW Mode (high noise immunity, standard mode) is set as default mode.EXCLUSIVE MODE: Relaysare switching exklusively, that means: either only relay 1 or only relay 2MONOSTABLE MODE: a user-definable on-time can be set for each relayQUIET IDENTIFY: RDM Identify only on LED indicators. Default: "LOUD MODE" (Relays switching at RDM Identify)SUB-DEVICES: When operating in Sub-Device-Mode, a individual start address (001...512) can be assigned to each relay

Our most reliable DMX relay is the 3266R-H. The compact module features six power contacts to switch loads up to 230VAC 10Amp resistive load. Each output has a combined N.O./N.C. contact. Special feature: the output contact setting remains intact even at full power failure! Thus a sudden power loss does not affect the current output setting!The 3266R-H is best suited for installation in electrical cabinets. It mounts neatly on standard 35mm DIN rail and features patented srewless WAGO cage clamp contacts for fast, reliable and easy wiring. Spring-loaded cage clamp contacts also ensure much lower contact resistance as compared to srew terminals, and are much faster to operate. Press to open, insert wire, release. Done.The functionality can be defined by selecting the the suitable DMX Personality and is stored in nonvolatile memory. The same appllies to the DMX start adress. All settings can also be managed using DMX RDM. The switching levels can be set to one of four trigger level combinations:Hysteresis 1: 50% / 51%Hysteresis 2: 25% / 75%Hysteresis 3: 3% / 97%Hysteresis 4: 0% / 1%To ensure safe switching, the 3266R-H also features a oversampling mode. This mode analyzes multiple data packets to suppress random noise.    DMX RELAY    6 outputs    DMX512/1990, DIN56930-2, DMX512-A, ANSI E1-20 DMX RDM    6 latching contact outputs    Combined N.O./N.C. contact, max. load 230VAC 10Amps resistive load    DMX RDM V1.0 compatible, 4 DMX Personalities    Power supply: 230V AC, approx. 3.5W    Dimensions: DIN rail, approx. 6.5 units width    Start adress board not comprised with delivery. If needed, please order separately

When you have to control multiple high power loads the 3206R-EP will be your favourite choice. The compact relay module features six indenpently controllable outputs which can be loaded with 10Amps @ 230VAC (resistive load). Output contacts are N.O./N.C. (normally open / normally closed) contacts.The 3206R-EP has been designed with power distribution systems in mind.The DMX relay function ("DMX PERSONALITY") and DMX start address can be set using a separate start address board to program settings, or set using DMX RDM commands. All settings are retained in non-volatile memory.Available relay trip ponts include: Hysteresis 1: 50% / 51% Hysteresis 2: 25% / 75% Hysteresis 3: 3% / 97% Hysteresis 4: 0% / 1% The 3206R-EP also features a DMX oversampling mode to guarantee reliable switching at all times. The oversampling mode will analyze multiple DMX data packets before any action is taken and will prevent the DMX relay from switching as long as input signals are not stable. You may override oversampling mode for fast switching purposes.DMX RELAY PCB6-channelDMX512/1990, DIN 56930-2, DMX512-A6 switching outputsRelays with N.O./N.C. (normally open/normally closed) contacts 230V 10A res. load4 DMX PersonalitiesPower supply: 230V AC, approx. 4,5WDimensions: pcb, approx. 110mm x 86mm

When there are many loads to be switched on or off, the 3207R-EP RDM may be your favourite choice. The compact DMX controlled relay drives 6x 230V / 10 amps resistive load using potential-free contacts. 6 independenty controllable outputs offer one changeover contact (N.O./N.C.) each. Additonally, the 3207R-EP features a common trigger slot. This allows to trigger all outputs absolutely simultaneously.The 3207R-EP RDM is best suited for power control applications. Rapid mounting and wiring thanks to screwless cage clamp contacts allowing higher current loads than conventional connectors. Cage clamp connectors provide reliable electrical contact at all times (no screws getting loose), and save wiring costs due to increased speed.Personality selection is by means of DMX RDM or a by a separate address board. Four personalities allow to select the relay trip points best matching your application:Hysteresis 1: 50% / 51%Hysteresis 2: 25% / 75%Hysteresis 3: 3% / 97%Hysteresis 4: 0% / 1%To improve noise immunity, the 3206R-EP RDM uses a special oversampling mode evaluating multiple data packets to ensure safe and reliable switching in worst conditions. Using a standard RDM controller (capable of processiong manufacturer specific PIDs), the relay modules can be reconfigured to subdevice mode. This allows to assign each output its own DMX start address. Additionally, the 3207R-EP features a separate trigger channel (again using its own start address) to trigger all outputs simultaneously. This makes the 3207R-EP your preferred choice for applications like gabucki systems, and more.DMX RELAY RDM6 channelDMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM6 switching outputs1 additional trigger slotchangeover contacts (N.O./N.C.), 230V 10amps resistive loadDMX RDM V1.0 compatible4 DMX personalitiesPower supply: 230V AC, approx. 3,5WDimensions: DIN rail, approx.6,5U

When there are many loads to be switched on or off, the 3206R-H RDM may be your favourite choice. The compact DMX controlled relay drives 6x 230V / 10 amps resistive load using potential-free contacts. 6 independenty controllable outputs offer one changeover contact (N.O./N.C.) each. The 3206R-H RDM is best suited for power control applications.Personality selection is by means of DMX RDM or a by a separate address board. Four personalities allow to select the relay trip points best matching your application: Hysteresis 1: 50% / 51% Hysteresis 2: 25% / 75% Hysteresis 3: 3% / 97% Hysteresis 4: 0% / 1% To improve noise immunity, the 3206R-H RDM uses a special oversampling mode evaluating multiple data packets to ensure safe and reliable switching in worst conditions. Specification DMX Relais 3206R-H RDMDMX RELAY RDM 6 channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 6 witching outputs changeover contacts (N.O./N.C.), 230V 10amps resistive load DMX RDM V1.0 compatible 4 DMX personalities Power supply: 230V AC, approx. 3,5W Dimensions: DIN rail, approx. 6,5U

When there are many loads to be switched on or off, the 3206R-H RDM may be your favourite choice. The compact DMX controlled relay drives 6x 230V / 10 amps resistive load using potential-free contacts. 6 independenty controllable outputs offer one changeover contact (N.O./N.C.) each. The 3206R-H RDM is best suited for power control applications. Rapid mounting and wiring thanks to screwless cage clamp contacts allowing higher current loads than conventional connectors. Cage clamp connectors provide reliable electrical contact at all times (no screws getting loose), and save wiring costs due to increased speed. Personality selection is by means of DMX RDM or a by a separate address board. Four personalities allow to select the relay trip points best matching your application: Hysteresis 1: 50% / 51% Hysteresis 2: 25% / 75% Hysteresis 3: 3% / 97% Hysteresis 4: 0% / 1% To improve noise immunity, the 3206R-H RDM uses a special oversampling mode evaluating multiple data packets to ensure safe and reliable switching in worst conditions. Specification DMX Relais 3206R-H RDMDMX RELAY RDM 6 channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 6 witching outputs changeover contacts (N.O./N.C.), 230V 10amps resistive load DMX RDM V1.0 compatible 4 DMX personalities Power supply: 230V AC, approx. 3,5W Dimensions: DIN rail, approx. 6,5U

Manufacturer: SOUNDLIGHTThe small solid state DMX relay pcb measures just 7 x 7 cm and is equipped with on-board XLR connectors (5pin XLR) conforming to the official DMX standard ANSI E1-11. The relay has two outputs capable of switching up to 500 watts at 230VAC. Output switches are potential-free. A start address board 3000P is included with delivery.

When you have to control multiple high power loads the 3206R-HP RDM will be your favourite choice. The compact relay module features six indenpently controllable outputs which can be loaded with 16Amps @ 230VAC (resistive load). Output contacts are N.O. (normally open) contacts. The 3206R-HP RDM has been designed with power distribution systems in mind.The DMX relay function („DMX PERSONALITY“) and DMX start address can be set using a separate start address board to program settings, or set using DMX RDM commands. All settings are retained in non-volatile memory. Available relay trip ponts include: Hysteresis 1: 50% / 51% Hysteresis 2: 25% / 75% Hysteresis 3: 3% / 97% Hysteresis 4: 0% / 1%The 3206R-HP RDM also features a DMX oversampling mode to guarantee reliable switching at all times. The oversampling mode will analyze multiple DMX data packets before any action is taken and will prevent the DMX relay from switching as long as input signals are not stable. You may override oversampling mode for fast switching purposes.Specifications DMX Relais 3206R-HP RDM6-channelDMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM6 switching outputsRelays with N.O. (normally open) contacts 230V 16A res. loadDMX RDM V1.0 compatible4 DMX PersonalitiesPower supply: 230V AC, approx. 4,5WDimensions: DIN rail, width 6,5 unitsVersion 3206R-HP1: Relays with FASTON/AMP 6,35mm terminalsVersion 3206R-HP2: Hi-Inrush-Relays (80A Inrush Current), WAGO Cage Clamps

Hersteller: LSS;Der LSS PowerSwitch 2 12x20A ist ein RDM-fähiger 12-Kanal-Schaltaktor mit einer Versorgungsleistung von 230V AC und 4600W pro Kanal. Die Ansteuerung erfolgt wahlweise über DMX oder Profibus-DP und bietet eine optionale Stromüberwachung für jeden einzelnen Lastkanal. Die Konfiguration erfolgt ebenfalls über Profibus-DP oder DMX. Wahlweise können die Grundeinstellungen des LSS PowerSwitch 2 12x20A aber auch lokal mittels zwei Tastschalter und der 7-Segment-Anzeige vorgenommen werden. Statusrückmeldungen und Messergebnisse können via RDM oder Profibus-DP gesendet werden. 

Hersteller: LSS;Der LSS PowerSwitch 2 6x20A 16DI/16DO ist ein RDM-fähiger 6-Kanal-Schaltaktor mit digitalen Interfaces zur Ansteuerung elektrischer Geräte und Signalgeber. Mit den Schnittstellen können bis zu 16 Geräte mit 24V/500mA angesteuert und 16 Rückmeldungen (24V) verarbeitet werden. Als Schaltaktor ist der LSS PowerSwitch 2 6x20A 16DI/16DO mit sechs Relaiskanälen ausgestattet, die eine Maximalleistung von 4600W/230V pro Kanal bieten. Die Ansteuerung erfolgt wahlweise über DMX oder Profibus-DP und bietet eine optionale Stromüberwachung. Wahlweise können die Grundeinstellungen aber auch lokal mittels zwei Tastschalter und der 7-Segment-Anzeige vorgenommen werden. Statusrückmeldungen und Messergebnisse können via RDM oder Profibus-DP gesendet werden. Spannungsversorgung 24VDC, 10A

2 Relays, switching individually (2 DMX data slots). Switching hysteresis is selectable, either 50%/51%, 3%/97%, 25%/75%, or 0%/1% (idally suited to switch flourescent lights). At loss off DMX control signal, all relays can be set to OFF, or to ON, or the last valid setting can be retained (DMX HOLD). Printed circuit board approx. 70 x 70 mm, with additional DMX start address switch board. Power supply: 12V DC, ca. 150 mA.The DMX relay 3202R-EP16 is DMX RDM comaptible (from version Mk7 onward). The relay can be operated from DMX512/1990, DIN56930-2, DMX512-A or ANSI E1-20 DMX RDM.Specifications DMX Relais 3202R-EP162-channelDMX512/1990, DMX512-A, ANSI E-20 DMX RDM2 switching outputsModel 3202R-EP6: Relay N.O./N.C., 230V 6A resistive LastModel 3202R-EP16: Relay N.O., 230V 16A resistive LastPower supply: 12V DC, approx. 150mADimensions: 70mm x 70mmUpon special request, all relay boards are also available for 24VDC operation.ModesFAST MODE: Relays operate very fast to drive effects SLOW MODE (high noise immunity, standard mode): is set as default modeEXCLUSIVE MODE: Relaysare switching exklusively, that means: either only relay 1 or only relay 2MONOSTABLE MODE: a user-definable on-time can be set for each relayQUIET IDENTIFY: RDM Identify only on LED indicatorsDefault: LOUD MODE (Relays switching at RDM Identify)SUB-DEVICES: When operating in Sub-Device-Mode, a individual start address (001…512) can be assigned to each relayDelivery without start address board (optional)Use a standard DMX RDM Controller to change the RDM settings.

2 Relays, switching individually (2 DMX data slots). Switching hysteresis is selectable, either 50%/51%, 3%/97%, 25%/75%, or 0%/1% (idally suited to switch flourescent lights). At loss off DMX control signal, all relays can be set to OFF, or to ON, or the last valid setting can be retained (DMX HOLD). Printed circuit board approx. 70 x 70 mm, with additional DMX start address switch board. Power supply: 12V DC, ca. 150 mA.The DMX relay 3202R-EP is DMX RDM comaptible (from version Mk7 onward). The relay can be operated from DMX512/1990, DIN56930-2, DMX512-A or ANSI E1-20 DMX RDM. Specifications DMX Relais 3202R-EP62-channelDMX512/1990, DMX512-A, ANSI E-20 DMX RDM2 switching outputsModel 3202R-EP6: Relay N.O./N.C., 230V 6A resistive LastModel 3202R-EP16: Relay N.O., 230V 16A resistive LastPower supply: 12V DC, approx. 150mADimensions: 70mm x 70mmUpon special request, all relay boards are also available for 24VDC operation.ModesFAST MODE: Relays operate very fast to drive effects.The SLOW Mode (high noise immunity, standard mode) is set as default mode.EXCLUSIVE MODE: Relaysare switching exklusively, that means: either only relay 1 or only relay 2MONOSTABLE MODE: a user-definable on-time can be set for each relayQUIET IDENTIFY: RDM Identify only on LED indicatorsDefault: „LOUD MODE“ (Relays switching at RDM Identify)SUB-DEVICES: When operating in Sub-Device-Mode, a individual start address (001…512) can be assigned to each relayUse a standard DMX RDM Controller to change the RDM settings.

The succesful relay board 3202R is also available as DIN rail unit: the 3202R-H. The 3202R-H features high-power changeover contacts (NO/NC, 230V at 10Amps resistive load max.). This makes the 3202R-H a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options, momentary or latching output: every combination is possible and can be set easils from your preferred RDM controller.In contrary to applications on stage, permanent installations do not need address setting switches etc. All settings are stored in nonvolatile memory electronically. Configurable parameters include: the DMX start adress the DMX personality (upper and lower trigger intensity) channel allocation DMX HOLD mode … and moreTo configure the relay 3202R-H, you need a suitable DMX RDM controller. To set the DMX start address and DMX personality, a start address board 3000P, 3003P, 3005P or 3006P can be used alternatively. This is available as optional accessory and is not contained with delivery.Specifications DMX Relais 3202R-H2-channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 2 switched outputs (N.O./N.C.) 230V typ. 8A resistive load 4 trigger level combinations selectable Exlusive mode selectable* Monostable Mode selectable* Power supply: 230V AC, approx. 3W Dimensions: DIN rail, approx. 5 width units *=DMX RDM controller required for configuration

There are many applications requiring more than just one or two switching outputs to be controlled by DMX. That’s where our 3232R-EP comes in handy. 32 individually controllable relays allow to switch low voltage or mains voltage, AC or DC, lighting, audio, effects or whatever your applications demands. The high contact load (10 amps at 230VAC resistive load) allows to switch high power loads seamlessly.The 3232R-EP comes as printed circuit board for easy integration into your application. All parameters can be managed using a DMX RDM controller and are stored in nonvolatile memory onboard. The DMX start address, the DMX personality and the DMX HOLD mode (behaviour at DMX signal loss) can be set using the enclosed DMX start address board 3000P. The 3232R-EP can be operated with or without start address board connected. Alternatively, a LED start address board 3003P, a LCD start address board 3005P, or a COG start address board 3006P can be purchased as separate accessory to create a comportable user interface. Specifications DMX Relais 3232R-EP32 data slots DMX512/1990, DIN56930-2, DMX512-A, ANSI E1-20 DMX RDM 32 switching outputs Relay outputs with combined N.O./N.C. contact, max. 230VAC 10A res. load DMX RDM V1.0 compatible, 4 DMX Personalities selectable Power supply monitoring via DMX RDM Power supply: 24 VDC, approx. 700mA 230VAC/24VDC power supply included Start address board 3000P included Dimensions: 300mm x 130mm

The 3204R-HPL features high-power changeover contacts (ON, 230V at 16 amps resistive load). This makes the 3204R-HPL a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options, momentary or latching output: every combination is possible and can be set easils from your preferred RDM controller. In contrary to applications on stage, permanent installations do not need address setting switches etc. All settings are stored in nonvolatile memory electronically. Configurable parameters include: the DMX start adress the DMX personality (upper and lower trigger intensity) channel allocation DMX HOLD mode … and more To configure the relay 3204R-HP, you need a suitable DMX RDM controller. To set start address and personality, a start address board  3000P, 3003P, 3005P or 3006P can be used alternatively. This is available as optional accessory and is not contained with delivery. Specifications DMX Relais 3204R-HP4-channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 2 switched outputs (N.O./N.C.) 230V 16A resistive load 4 trigger level combinations selectable Exlusive mode selectable* Monostable Mode selectable* Power supply: 24.0VDC, approx. 100mA** Dimensions: DIN rail, approx. 5 width units *=DMX RDM controller required for configuration**=no address board connected, all relays ON

The 3204R-HP features high-power changeover contacts (ON, 230V at 16 amps resistive load). This makes the 3204R-HP a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options, momentary or latching output: every combination is possible and can be set easils from your preferred RDM controller. In contrary to applications on stage, permanent installations do not need address setting switches etc. All settings are stored in nonvolatile memory electronically. Configurable parameters include: the DMX start adress the DMX personality (upper and lower trigger intensity) channel allocation DMX HOLD mode … and more To configure the relay 3204R-HP, you need a suitable DMX RDM controller. To set start address and personality, a start address board  3000P, 3003P, 3005P or 3006P can be used alternatively. This is available as optional accessory and is not contained with delivery. Specifications DMX Relais 3204R-HP4-channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 2 switched outputs (N.O./N.C.) 230V 16A resistive load 4 trigger level combinations selectable Exlusive mode selectable* Monostable Mode selectable* Power supply: 24.0VDC, approx. 100mA** Dimensions: DIN rail, approx. 5 width units *=DMX RDM controller required for configuration**=no address board connected, all relays ON

The 3204R-H features high-power changeover contacts (NO/NC, 230V at 8 amps resistive load). This makes the 3204R-H a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options, momentary or latching output: every combination is possible and can be set easils from your preferred RDM controller. In contrary to applications on stage, permanent installations do not need address setting switches etc. All settings are stored in nonvolatile memory electronically. Configurable parameters include: the DMX start adress the DMX personality (upper and lower trigger intensity) channel allocation DMX HOLD mode … and more To configure the relay 3204R-H, you need a suitable DMX RDM controller. To set start address and personality, a start address board  3000P, 3003P, 3005P or 3006P can be used alternatively. This is available as optional accessory and is not contained with delivery. Specifications DMX Relais 3204R-H4-channel DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM 2 switched outputs (N.O./N.C.) 230V 8A resistive load 4 trigger level combinations selectable Exlusive mode selectable* Monostable Mode selectable* Power supply: 24.0VDC, approx. 100mA** Dimensions: DIN rail, approx. 5 width units *=DMX RDM controller required for configuration**=no address board connected, all relays ON

Der e:cue SYMPL relay Node ist ein dreifaches Relais-Interface für die e:cue Steuerungslösung SYMPHOLIGHT. Er bietet 3 einpolige Relaisausgänge. Mit Spannung versorgt wird der SYMPL relay Node von einem externen Netzteil oder über Power-over-Ethernet (PoE). Die Montage erfolgt auf einer Standard-35 mm Hutschiene oder an einem Einhängloch auf der Rückseite auf jeder stabilen vertikalen Fläche. Der SYMPL relay Node ist eine einfach zu nutzende, zuverlässige Interfacelösung für SYMPHOLIGHT.Features3 einpolige Relaisausgänge für bis zu 3 A/250 V~Flexible Montage auf 35 mm-DIN-Hutschiene oder an vertikalen OberflächenEinfache und unkomplizierte Integration in e:cue SYMPHOLIGHTTechnische Daten Abmessungen Nodes (B x H x T): 53.5 x 90.5 x 62 mm (ohne Befestigungsclip)Stromversorgung: 24 V= oder PoE IEEE 802.3af auf RJ45 (außer dali Node)Betriebstemperatur: 0 … 50 °CLagertemperatur: -10 … 70 °CElektrische Sicherheit: SELVBetriebs-/Lagerfeuchte: 0 … 80% nicht kondensierendSchutzklasse: IP20Gehäuse: Selbstlöschendes PC/ABSMontage: auf 35 -m-DIN-Hutschiene (DIN 43880), 3 (Nodes) oder 5 (Core S) Einheiten oder MontagelochEthernet-Port: 1 x e:net 10/100 Mbit/s RJ-45