The 7601A-H has been created to provide a simple control solution for DALI ballasts. The interface accepts a standard voltage 1...10V (or 0...10V respectively) or a simple potentiometer as control input.
Output is in DALI BROADCAST mode (all connected ballasts react simultaneously) or in DALI GROUP mode (all participants or DALI group #1 react). The device can be reconfigured to control group #2 or adress #1 or address #2 alternatively.
The output conversion is performed constantly and periodically. If needed, the decoder can be set to single mode: the output will then only be written when the input signal changes. Noisy input signals can be smoothed using the optional "slow" mode. This ensures smooth intensity changes even with stepping input voltages.
The 7601A-H is intended to be used in a standard DALI bUS system and makes use of the standard bus topology. Thus you may need a DALI bus power supply to operate the DALI bus.
- The 7601A-H power supply is from standard 24V DC
- 1-10V tp DALI CONVERTER
- 1-channel
- Input: 1-10V (or 0...10V, or potentiometer 22k)
- DALI Output: BROADCAST, or GROUP (1/2), or ADDRESS (1/2)
- Output: DALI Bus
- Power Supply: 18-24VDC, approx. 1W
Login