The universal dimmer is suitable for reliable operation of high-voltage lamps, magnetic transformers, electronic transformers, ESL and LED retrofit lamps. There are 2 separate dimmer outputs available, each of which can be loaded with 700W. By configuration and parallel connection of the outputs the dimmer is loadable with 1x1400W.Each channel is separately parameterizable to the corresponding load type (phase on or phase off mode). The dimmer independently checks the connected load by performing a short test after the first application of the operating voltage to determine whether the connected load can be operated with the desired setting.    2-channel dimmer 2x700W or 1x 1400W in master mode    phase ON or phase OFF mode adjustable per channel    automatic load detection    interfaces: 0-10V, 1-10V, 1-button dimmer, DMX-512, 8Bit and 16Bit, DMX-RDM    optimized for retrofit lamps, electr.transformers    suitable for operation in 50Hz and 60Hz networks    suppression of ripple control signals and mains interference    parameterizable via USB e.g. dimming curves    Manual operation via potentiometers possible    Oscilloscope function for load testing