Manufactor: Chauvet,DMX AN2 is a multi-purpose Art-Net/sACN node that converts 1 Ethernet cable to 2 DMX universes. Its optical and electrical isolation is ready for any situation and the durable Neutrik® etherCON® in/through port ensures reliability. The built-in web-based GUI means no universe/subnet setup. DMX-AN2 automatically redirects the web page if the IP address is changed. The unit supports Power over Ethernet (POE) or an external power supply. Both outputs can be set to either Art-Net or sACN and DMX-AN2 functions as an Art-Net to DMX or DMX to Art-Net interface. Onboard LED indicators quickly inform status and the integrated mounting bracket is included to quickly install into any location.. DMX Channels: 1024DMX Connectors: 3- pin XLRInput Voltage: (DC): 9 VDC, 500 mA (external power supply: 100 to 240  VAC, 50/60 Hz) (POE): 48V 0.4 AApprovals: CEControl Protocol: Art-Net, DMX, sACNArt-Net Version: 3

Mobiler Netzwerkknoten mit Gehäuse; Kühlung: lüfterlos betreibbar; Menüsystem mit Display und 4 Tasten; Schnittstellen: DMX: 4x XLR 5-pol., 2 x IN + 2x x OUT;  Anzeige: Link-LED, Data-LED, Geschwindigkeit; Lichtprotokolle: Art-Net/RDM (ArtisticLicence); AVAB-IPX (AVAB, transtechnik, LDDE,.); AVAB/UDP (transtechnik); ShowNet (Strand Lighting); sACN (ANSI E1.17), Lieferung ohne Spannungsversorgung (optional)

mit Stromversorgung (PowerCon) und Netzanschluß (RJ45), Lieferung ohne Anschlusskabel (Schuko/PowerCon) und Netzwerkkabel

Input protocols are ArtNet 1,2,3 or ArtNet4, as well as sACN. Output: 4 universes DMX512, fully RDM compliant. All that is packaged in a neat 5U width comapct DIN rail unit, the EtherNet to DMX converter is optimally suited for power and signal distribution systems.Power supply is via PoE (Power over EtherNet conforming to standard IEEE 802.3af-2003) or external PSU 24VDC (not included with delivery). The converter can easily be configured calling the internal web server. This allows to select the protocol used, configure the DMX outputs and assign the nets and sub-nets to the outputs. It couldn't be simpler!Ethernet to DMX512 converter4 universesInput protocol: ARTNet 1,2,3,4, sACNOutput protocol: DMX512/1990, DMX512-A, DIN56930-2, DMX RDM 1.0Operating voltage: 24VDCAlternative power supply over EtherNet (POE)Dimensions: DIN rail 35mm, 5U widthANSI E1-20 DMX RDM V1.0 compatible