The demultiplexer 3012C-EP RDM decodes a DMX512 input signal to drive 12 analog outputs, supplying a 0…+10V control voltage to drive dimmer packs, smoke machines or similar equipment. The decorder is also able to drive active loads like 1…10V electronic ballasts. Additionally, the outputs can be set to inverted mode to deliver a 0…-10V control signal. Power supply is 230VAC.Delivery comprises a separate start address board 3000P*. The decoder can also be configured to master mode (CH1…12 inputs, CH13 master).*= The start adress board 3000P is comprised with delivery. Other start address boards cannot be used with the 3012C-EP.Specifications DMX Demultiplexer 3012C-EP RDM12 control outputs DMX512/1990, DMX512-A, DIN56930-2, ANSI E1-20 DMX RDM 12 outputs 0…+10V, or 0…-10V, max. 1mA Power supply: 230V AC, approx. 2,2W Dimensions: 140mm x 65mm  

A small demux, but a big performer: the 3012B-EP features full compatibility not only with standard USITT DMX512/1990, but also DMX512-A and even DMX RDM (ANSI E1-20). The demux has 12 outputs, accessible via a 16 pin ribbon connector. The demux drives all kind of 0-10V equipment, including dimmer packs, smoke machines and more. You can assign an additional master channel to control all outputs simultaneously. Neutrik XLR connectors are standard, power supply is 15…24V DC (approx. 60mA).Delivery is complete with start adress board 3000P. Use DMX RDM to remotely set the start adress, the DMX personality, and the output response. Read power supply sensor, operating hours and system start-ups.Dimensions are 70mm x 70mm. Specifications DMX Demultiplexer 3012B-EP12-channel (13-ch w/ master)DMX512/1990, DMX512A, DMX RDM12 outputs 0…+10V, max. 4mAPower supply: 15…24V DC, approx. 60mADimensions: 70mm x 70mm

 This small 2-channel demux is some sort of genius: the two 0- 10V outputs can be independently operated and can even drive 1-10V equipment, e.g. electronic ballasts.This makes this demultiplexer a truly universal tool. The 3002B-H can drive dimmer packs, smoke machines, electronic ballasts, or motor v/f converters - to name just a few. Additionally, the 3002B-H features two separate relay outputs to switch DC voltage, AC voltage or audio signals. You can assign the relay to its own DMX control channel, or to switch simultaneously with the respective analog output. The relay will then automatically be fired at 1% intensity to allow synchronous operation with elecronic ballasts oder LED converters. Since analog controlled electronic ballasts cannot be driven to "off" via the control input, this allows to syncronously switch power to achive a true "full off" control.    DMX DEMULTIPLEXER    2-channel    DMX512/1990, DIN56930-2, DMX512-A, ANSI E1-20 DMX RDM    2 outputs 0...+10V, max. 2mA    3 output characteristics, 2 self-definable USER curves    2 Relay outputs max. 230V, max. 6A (resistive load)    1 DMX output using its own start address    All remote settings easy and comfortable by DMX RDM    Power supply: 24V DC (20...26V), approx. 60mA    Dimensions: DIN Rail, width 4U (68mm)

The 32-channel demux is equipped with high integrated D/A converters and uses high impedance slew rate limited DMX512 line drivers for improved noise immunity. This means: more devices can be attached to one DMX line, and the srl characteristics dramatically improve noise immunity on the DMX transmission line. This boosts the overall performance of your digital lighting system. Signallling is performed via indicator LEDs on the separate start address board (comprised with delivery). Red means ERRPR or No Signal, Green means OK. Start address setting is by decimal switches - no need to calculate weird binary addresses as required with commonly used DIL switches.DMX DEMULTIPLEXER32-channelDMX512/1990, DIN56930-2, DMX512-A32 outputs 0...+10V, max. 2mAresolution: 8 bit (40mV/step)power supply: 15...24V DC, approx. 35mA (idle state)Dimensions: 90mm x 70mm

Hersteller: XTBA; Kunststoffgehäuse für Hutschiene; Versorgungsspannung 230V (190V-250V); 1 DMX-Eingang auf 8 Analoge 0-10V DC Ausgänge; Einzelne Ausgänge können auch auf NON-DIM geschaltet werden. Klemmanschlüsse.

Wandlerplatine von DMX512 auf 8 Kreise 0-10V+. Jeder Kanal kann auch als Non-Dim eingestellt und betrieben werden. Verbindungen (Spannungsversorgung, DMX und Analog Ausgänge über HE14 / Molex Verbinder.Spannungsversorgung über AC 9V oder DC 15V 200ma. 

Manufacturer: SOUNDLIGHTNOTE: Production stopped, only stock sale!This small 2-channel demux is some sort of genius: the two 0- 10V outputs can be independently operated and can even drive 1-10V equipment, e.g. electronic ballasts.This makes this demultiplexer a truly universal tool. The 3221C can drive dimmer packs, smoke machines, electronic ballasts, or motor v/f converters - to name just a few. Additionally, the 3221C-EP features a separate relay output (CH 3) to switch DC voltage, AC voltage or audio signals. You can assign the relay to its own DMX control channel, or to switch simultaneously with CH1. Then the relay will then automatically be fired at 1% intensity to allow synchronous operation with elecronic ballasts. Since analog controlled electronic ballasts cannot be driven to "off" via the control input, this allows to syncronously switch power to achive a true "full off" control.DMX DEMULTIPLEXER2-channelDMX512/1990, DIN56930-2, DMX512-A2 outputs 0...+10V, max. 2mA1 Relay output max. 230V, max. 10A (resistive load)Power supply: 24V DC (15...32V), approx. 60mADimensions: 72mm x 72mm

DMX multiplexer converts analog control signals (0...+10V DC) into digital DMX control signals. The 3112A-H accepts 12 analog inputs. It is ideally suited to retrofit existing light control desks, operating panels and for testing purposes. You may set the DMX start address to any value (1...512). The unit may be configured to linear mode, to switsching mode or to 1-10V input sensitivity. Additionally, a second independent DMX512 out may be activated by the input signal. The 3112A-H requires a 3000P or 3003P address board for programming. This is not contained with delivery and must be orderes separately if needed. Signal inputs:             12signal voltage:            0...10V or 1...10V (selectable)input impedance:       > 10kOhmoutput:                       DMX512, 512 data slots, spring terminalssupply voltage:          230V AC 50 Hzmounting:                  DIN rail mout