The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3000P is the standard address seting board and comes with all decoders in printed circuit board style. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.Specifications DMX start address board 3000PAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513…999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

Manufacturer: SOUNDLIGHTThe start address board 3000P is the standard address seting board. It can also be used to program DIN rail decoders. Four DIP switches allow additional settings: DMX HOLD mode (DIP1, DIP2) and DMX personality selection (DIP3, DIP4). Two LEDs indicate operation and error conditions.DMX START ADDRESS BOARDAddress setting via BCD switches in decimal formatPower supply: automatically from hostDimensions: 70mm x 22mmSpecial feature: the 3000P allows to address the address range 513...999, which is outside the valid DMX512 start address range. On some decoders, these addresses are used to address test functions or user parameter setting).

The start address board 3005P is equipped with a backlight illuminated 2-line LCD display. The start adress board can be used in conjunction with all standard and RDM decoders (unless otherwise indicated), and can be used to program DIN rail modules as well.All settings are menu driven. Simply turn the encoder to select your option, then click to confirm or to exit. Additional configuration options include DMX HOLD mode, DMX personality, display contrast and backlight intensity. RDM- and Standard-Mode (for use with legacy DMX decoders) can be set at your option. A red LED indicates error conditions.The 3005P is DMX RDM compatible and can read from RDM decoders.DMX start adress board 3005PSelection and setting via menu and rotary encoderPower supply: automatically from hostDimensions: 30mm x 120mm

The start address board 3006P is equipped with a backlight illuminated 2-line LCD display. The start adress board can be used in conjunction with all standard and RDM decoders (unless otherwise indicated), and can be used to program DIN rail modules as well.All settings are menu driven. Simply turn the encoder to select your option, then click to confirm or to exit. Additional configuration options include DMX HOLD mode, DMX personality, display contrast and backlight intensity. RDM- and Standard-Mode (for use with legacy DMX decoders) can be set at your option. Coloured LEDs indicate DMX status and error conditions.The 3006P is DMX RDM compatible and can read from RDM decoders.DMX start address board 3006PSelection and setting via menu and rotary encoderPower supply: automatically from hostDimensions: 32mm x 100mmAvailable versions3006P: reflective display (standard)3006PI: back illuminated display (professional)