Manufacturer: SOUNDLIGHTThis pcb performs electrical isolation and line level amplification of DMX512 signals. The line driver features microprocessor-controlled DMX512 analysis; signalling is with red/green LED displays. Fast and easy connection with patented cage clamp connectors.1 DMX UNIVERSECompatibility: DMX512/1990, DMX512A, DIN56930-2Speisung/Power Supply: 230V AC, ca. 2WAbmessungen/Dimensions: 136mm x 28mm

The SOUNDLIGHT 2-output DMX SPLITTER 3402A comes as ready-to-use printed circuit board equipped with Neutrik XLR connectors conforming to all present DMX standards. Power supply is 230VAC. The DMX input is optically isolated from the outputs.Specifications 3204A-EP1 DMX UNIVERSE, 2 outputsCompatibility: DMX512/1990, DMX512-A, DIN56930-2XLR-connectors (5pin) onboard (input and outputs)Power supply: 230V AC, approx. 3WDimensions: 100mm x 90mm

The 3402B-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock. The DMX splitter consists of a DMX IN data input, and two DMX OUT data outputs, which are electrically isolated in respect to the data input. Thus a defective fixture connected to one output will never affect DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability.The 3402B-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. Sophisticated microprocessor control makes the 3402B-H more reliable and faster than competing products.Specifications DMX Splitter / Booster 3402B-H1 DMX UNIVERSE, 2 outputsCompatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2, ANSI E1-20 DMX RDMCage clamp connectors (Input, and 2 opto-isolated outputs)Power Supply: 24V DC approx 2.5WDimensions: DIN rail, width 2UTrue signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports signal properties when allowable limites are reached. DMX RDM data traffic is displayed on stauts LEDs.Transparent deviceThe 3402B-H is fully RDM compatible, but it does not appear as RDM device itself. Thus the 3402B-H does not show any RDM properties. This does neither affect the number of connected RDM devices nor RDM functionality. This behaviour is known as „transparent“: effective, inconspicious. Since the 3402B-H only cares about the standardized structure of RDM commands, and does not care about contents, on of it’s big advantages is to function absoluteley independent of signal contents. Thus future changes or amendments to RDM commands will never affect the 3402B-H: this splitter will function always.

The 3404C-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock. The DMX splitter consists of a DMX IN data input, one direct DMX THRU output and four electrically isolated DMX OUT data outputs. Since all outputs are individually electrically isolated, a defective fixture connected to one output will neither affect other outputs nor DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability. The 3404C-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. Using individual branch discovery, only devices connected to one output are discovered simultaneously. This reduces the number of logical devices per discovery run, lowering signal noise and speeding up the total discovery process.Specifications DMX Splitter 3404C-H1 DMX UNIVERSE, 4+1 outputsCompatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2, ANSI E1-20 DMX RDMCage clamp connectors (Input, DMX THRU and 4 opto-isolated outputs)Wide range Power Supply: 85…230V AC, approx. 4WDimensions: DIN rail, width 6,5UTrue signal analysis While the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports signal properties when allowable limites are reached. The number of data slots contained in the actual data telegram is displayed, and DMX RDM data traffic is identified and displayed as „rdn“.Transparent deviceThe 3404C-H is fully RDM compatible, but it does not appear as RDM device itself. Thus the 3404C-H does not show any RDM properties. This does neither affect the number of connected RDM devices nor RDM functionality. This behaviour is known as „transparent“: effective, inconspicious. Since the 3404C-H only cares about the standardized structure of RDM commands, and does not care about contents, on of it’s big advantages is to function absoluteley independent of signal contents. Thus future changes or amendments to RDM commands will never affect the 3404C-H: this splitter will function always.

The 3404A-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock.The DMX splitter consists of a DMX IN data input, 1 direct DMX THRU output and 4 electrically isolated DMX OUT data outputs. The outputs are electrically isolated to the DMX data input. This improves overall system stability and system reliability. The electrical isolation prevents ground loops and distribution of erroneous electrical potentials.Additionally, the 3404A-H features a DMX THRU output connector, which – at your option – delivers a amplified or direct DMX signal for addititional splitters.Specifications DMX Booster / Splitter 3404A-H1 DMX UNIVERSE, 4+1 outputsCompatibility: DMX512/1990, DMX512A, DIN56930-2Cage clamp terminals (Input, DMX THRU and Outputs)Power supply: 230V AC, approx. 4.5WDimensions: DIN rail, approx. 6.5UTrue signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports signal properties when allowable limites are reached. The display shows the number of data slots contained in the actual data telegram.

The 3404B-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock.The DMX splitter consists of a DMX IN data input, one direct DMX THRU output and four individually electrically isolated DMX OUT data outputs. The outputs are electrically isolated to the DMX data input. This improves overall system stability and system reliability. The electrical isolation prevents ground loops and distribution of erroneous electrical potentials. Additionally, the 3404A-H features a DMX THRU output connector, which – at your option – delivers a amplified or direct DMX signal for addititional splitters.Specifications DMX Splitter 3404B-H1 DMX UNIVERSE, 4+1 outputsCompatibility: DMX512/1990, DMX512A, DIN56930-2Cage clamp terminals (Input, DMX THRU and Outputs)Power supply: 230V AC, approx. 4.5WDimensions: DIN rail, approx. 6.5UTrue signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports signal properties when allowable limites are reached. The display shows the number of data slots contained in the actual data telegram.

The 3406LC-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock.The DMX splitter consists of a DMX IN data input, and six electrically isolated DMX OUT data outputs. Since the outputs are electrically isolated in respect to the data input, a hazard on any ouf the output lines will neither affect the controller, nor DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability.The 3406LC-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. At discovery, all devices connected to one or more outputs are discovered simultaneously. This reduces the number of discovery runs significantly.Specifications DMX Splitter 3406LC-H1 DMX UNIVERSE, 6 outputs Compatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2, ANSI E1-20 DMX RDM Cage clamp connectors (Input, and 6 opto-isolated outputs) Wide range Power Supply: 100…240V AC, approx. 6W Dimensions: DIN rail, width 6.5U W: 114mm (6.5 units) D: 92mm H: 65mm Signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal. Detection of valid DMX data, or DMX RDM data is displayed.RDM DeviceThe 3406LC-H is fully RDM compatible, but does not appear as RDM device itself („transparent device“).

The 3408LC-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock.The DMX splitter consists of a DMX IN data input, and eight electrically isolated DMX OUT data outputs. Since the outputs are electrically isolated in respect to the data input, a hazard on any ouf the output lines will neither affect the controller, nor DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability.The 3408LC-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. At discovery, all devices connected to one or more outputs are discovered simultaneously. This reduces the number of discovery runs significantly.Specifications DMX Splitter 3408LC-H1 DMX UNIVERSE, 8 outputs Compatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2, ANSI E1-20 DMX RDM Cage clamp connectors (Input, and 6 opto-isolated outputs) Low Voltage Version: 12...24V DC Dimensions: DIN rail, width 6.5U W: 105mm (6 units) D: 90mm H: 65mm Signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal. Detection of valid DMX data, or DMX RDM data is displayed.RDM DeviceThe 3408LC-H is fully RDM compatible, but does not appear as RDM device itself („transparent device“).

The 3408LC-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. Simply click onto rail to install, or pull yellow release lever to unlock.The DMX splitter consists of a DMX IN data input, and eight electrically isolated DMX OUT data outputs. Since the outputs are electrically isolated in respect to the data input, a hazard on any ouf the output lines will neither affect the controller, nor DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability.The 3408LC-H is fully DMX RDM compatible, operates in bidirectional mode and supports E1-20 and E1-37 DMX RDM standards. Multiple splitters can be used in parallel to provide more output branches. At discovery, all devices connected to one or more outputs are discovered simultaneously. This reduces the number of discovery runs significantly.Specifications DMX Splitter 3408LC-H1 DMX UNIVERSE, 8 outputs Compatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2, ANSI E1-20 DMX RDM Cage clamp connectors (Input, and 6 opto-isolated outputs) Wide range Power Supply: 100…240V AC, approx. 6W Dimensions: DIN rail, width 6.5U W: 105mm (6 units) D: 90mm H: 65mm Signal analysisWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal. Detection of valid DMX data, or DMX RDM data is displayed.RDM DeviceThe 3408LC-H is fully RDM compatible, but does not appear as RDM device itself („transparent device“).

DMX Splitter for 19 inch Rack, with DMX IN / DMX Through and 10 x DMX OUT.DMX SPLITTER / BOOSTER1 DMX UNIVERSE, 10 AusgängeCompa. DMX512/1990, DMX512A, DIN56930-2EtherCon onboard (1 x Input, 1x DMX THRU and 10x DMX out)230V AC, ca. 11WDimensions: 19 inch (482mm) x 1 HE (44,5mm)

DMX Splitter for 19 inch Rack, with DMX IN / DMX Through and 10 x DMX OUT.DMX SPLITTER / BOOSTER1 DMX UNIVERSE, 10 AusgängeCompa. DMX512/1990, DMX512A, DIN56930-2EtherCon onboard (1 x Input, 1x DMX THRU and 10x DMX out)230V AC, ca. 11WDimensions: 19 inch (482mm) x 1 HE (44,5mm)

Manufacturer: SoundlightThe 3405A-FG is a DMX splitter for rack mount use and provides five independent, individually optical isolated output ports. Since the outputs are electrically isolated in respect to the data input, a hazard on any ouf the output lines will neither affect the controller, nor DMX IN or DMX THRU data. This dramatically improves overall system stability and system reliability. SIGNAL ANALYSISWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal. Detection of valid DMX data and DMX data slot count is displayed.DMX SPLITTER / BOOSTER1 DMX UNIVERSE, 5 outputsCompatibility: DMX512/1990, ANSI E1-11 DMX512A,DMX to DIN56930-2XLR5 connectors (Input, THRU and 5 opto-isolated outputs)Power Supply: 230V AC, approx. 6WDimensions: 19" 1U (44.4mm)DMX DEVICEThe 3405A-FG is fully DMX compatible. It does not change or modify signal contents.

The 3404LC-H is a DMX splitter intended for DIN rail mount on standard 35mm rails. The DMX splitter consists of a DMX IN data input, one direct DMX THRU output and four electrically isolated DMX OUT data outputs. The outputs are electrically isolated to the DMX data input. This improves overall system stability and system reliability. The electrical isolation prevents ground loops and distribution of erroneous electrical potentials. Additionally, the 3404LC-H features a separate DMX THRU out connector. Best of all: the brand new 3404LC-H is now absolutely DMX RDM compliant. Many exciting new features at no additional cost!TRUE SIGNAL ANALYSISWhile the DMX splitter does not modify DMX signal contents or timing parameters, it monitors the signal and reports when allowable limits have been reached. LEDs show standard DMX and DMX RDM traffic.Specifications DMX Splitter 34404LC-H1 DMX UNIVERSE, 4 outputs, 1 THRU portCompatibility: DMX512/1990, DMX512-A, DIN56930-2, ANSI E1-20 DMX RDMCage clamp terminals (Input, DMX THRU and Outputs)Power supply: 115-230V AC, approx.2W (idle: 0.85W)Dimensions: DIN rail, width 5U (86mm)

Hersteller: LSS;1x DMX-In, 1x DMX-'thru', 12x DMX-Out, ESTA-Belegung,Eingehende Signale werden verstärkt und auf zwölf voneinander unabhängige Ausgänge verteilt. Jeder Ausgang ist wie der Eingang mittels Optokoppler potentialgetrennt und verfügt über eine EMV-Schutzschaltung.Mittels der RDM Switch Taste kann der Booster in drei Modi versetzt werden. Diese werden über die RDM Modus LED farbig rückgemeldet und haben folgende Bedeutung:Grün: RDM eingeschaltetRot: RDM ausgeschaltetWeiß: Gerät arbeitet als transparentes Inline-Device19", 1 HE,  200-240 VAC, 50/60Hz, 7W, Lieferung mit Netzkabel und Schukostecker

The Smart Fix D is housed in a D case module and provided full DMX user DMX retiming. A surprisingly number of DMX fixtures (given that DMX is 30+ years old) still seem unable to understand standard DMX so with the Smart Fix hopefully the correct timings can be selected.Retime DMX with individual Break,MAB,Interbyte and EOP timingsLeft shift channelsRight shift channelsLimit the number of channelsThe Smart Fix can also address shift both left and right. Some fixtures have limited address range (who knows why) so by using the shift function their idiosyncratic address system can be used. For example left shift channel 100 becomes channel 1 etc. and in right shift channel 1 becomes channel 100 etc.The Smart Fix can also limit the number of channels transmitted.

The XTBA 10i / RDM View is a one in, ten out (with loop through) DMX/RDM splitter. Housed in 2U 19” rack this provides full RDM functionality for devices connected to its outputs. The ten outputs are fully opto isolated and rebuffered.The splitter incorporates a 2 x 20 LCD display to allow monitoring of DMX input levels or DMX parameters or can be used as a stand alone controller for testing during set up. The splitter can also be used to re-time DMX.As well as being a standard DMX splitter the Smart Splitter 10i / RDM View is a fully functional RDM splitter allowing the distribution of RDM requests and responses from its 10 outputs and input.Output MonitoringA potential problem with RDM is that any short or overload on any responder can cause the entire RDM system to fail. The Smart Splitter 10i / RDM View will monitor the ten outputs and block any shorted or overloaded outputs thus protecting the network.The Smart Splitter 10i / RDM View monitors all RDM traffic and will block incorrectly formatted request messages. As well as distributing RDM traffic, the splitter will function as a RDM device itself. So it is discoverable and can have its personality set, labels changed, communications status checked and supply information about itself. Displays for Power and Overload are via the red LED. RDM data is shown via the yellow LED and data in and input error via the green LED. RDM Personalities: The 10i/RDM View has six personalities set via RDM.Personality 1Normal RDM SplitterPersonality 2Hold Last Frame: The splitter will retransmit the last valid frame in the event of data loss on the input. RDM requests and responses will still be passed through.Personality 3 : Clean Up AllThe splitter will strip out any RDM data from the input data and only pass DMX level information. Personality 4Clean Up All + Hold Last Frame: As above but will hold the last valid frame on the input.Personality 5Clean Port On: Output ten will remove any RDM messages but pass through normal DMX. So devices that may misunderstand RDM messages as level information can be connected.Personality 6Clean Port + Hold Last Frame: As above but will hold the last valid frame on the input.Specifications Smart Splitter 10i/RDM ViewLength: 430.00mmDepth: 270.00mmHeight: 82.00mmWeight: 4.50Kg (approx)120v AC (90v - 140v); 120v operation requires internal switching to select correct voltage240v AC (190v - 250v)19" 2U Rack MountMetal CasedBlack

The XTBA 10i / RDM View is a one in, ten out (with loop through) DMX/RDM splitter. Housed in 2U 19” rack this provides full RDM functionality for devices connected to its outputs. The ten outputs are fully opto isolated and rebuffered.The splitter incorporates a 2 x 20 LCD display to allow monitoring of DMX input levels or DMX parameters or can be used as a stand alone controller for testing during set up. The splitter can also be used to re-time DMX.As well as being a standard DMX splitter the Smart Splitter 10i / RDM View is a fully functional RDM splitter allowing the distribution of RDM requests and responses from its 10 outputs and input.Output MonitoringA potential problem with RDM is that any short or overload on any responder can cause the entire RDM system to fail. The Smart Splitter 10i / RDM View will monitor the ten outputs and block any shorted or overloaded outputs thus protecting the network.The Smart Splitter 10i / RDM View monitors all RDM traffic and will block incorrectly formatted request messages. As well as distributing RDM traffic, the splitter will function as a RDM device itself. So it is discoverable and can have its personality set, labels changed, communications status checked and supply information about itself. Displays for Power and Overload are via the red LED. RDM data is shown via the yellow LED and data in and input error via the green LED. RDM Personalities: The 10i/RDM View has six personalities set via RDM.Personality 1Normal RDM SplitterPersonality 2Hold Last Frame: The splitter will retransmit the last valid frame in the event of data loss on the input. RDM requests and responses will still be passed through.Personality 3 : Clean Up AllThe splitter will strip out any RDM data from the input data and only pass DMX level information. Personality 4Clean Up All + Hold Last Frame: As above but will hold the last valid frame on the input.Personality 5Clean Port On: Output ten will remove any RDM messages but pass through normal DMX. So devices that may misunderstand RDM messages as level information can be connected.Personality 6Clean Port + Hold Last Frame: As above but will hold the last valid frame on the input.Specifications Smart Splitter 10i/RDM ViewLength: 430.00mmDepth: 270.00mmHeight: 82.00mmWeight: 4.50Kg (approx)120v AC (90v - 140v); 120v operation requires internal switching to select correct voltage240v AC (190v - 250v)19" 2U Rack MountMetal CasedBlack

The XTBA Smart Splitter 10i is a one in ten out, fully optically isolated and buffered data splitter with over voltage and data line protection on the outputs.The data input is fully terminated and the data loop through is a re-transmitted copy of the input with a relay override, so data will pass through in the event of power failure.Specifications Smart Splitter 10i RJ45Length: 430.00mmDepth: 270.00mmHeight: 44.00mm120v AC (90v - 140v); 120V Operation is internally selectable240v AC (190v - 250v)Weight: 4.00Kg (approx)19" 1U Rack MountBlack

The XTBA Smart Splitter 10i is a one in ten out, fully optically isolated and buffered data splitter with over voltage and data line protection on the outputs.The data input is fully terminated and the data loop through is a re-transmitted copy of the input with a relay override, so data will pass through in the event of power failure.Specifications Smart Splitter 10i XLRLength: 430.00mmDepth: 270.00mmHeight: 44.00mm120v AC (90v - 140v); 120V Operation is internally selectable240v AC (190v - 250v)Weight: 4.00Kg (approx)19" 1U Rack MountBlack

The XTBA Smart Splitter 10i/RDM – Rig Mount is a 1 in 10 out (with loop through) DMX/RDM splitter. Designed for truss or bar mounting. It provides full RDM functionality for devices connected to its outputs. The 10 outputs are fully opto isolated and rebuffered.As well as being a standard DMX splitter the 10i/RDM is a fully functional RDM splitter allowing the distribution of RDM requests and responses from its 10 outputs and input.Output MonitoringA potential problem with RDM is that any short or overload on any responder can cause the entire RDM system to fail. The 10i/RDM will monitor the ten outputs and block any shorted or overloaded outputs thus protecting the network.The 10i RDM monitors all RDM traffic and will block incorrectly formatted request messages. As well as distributing RDM traffic the 10i/RDM will function as a RDM device itself. So it is discoverable and can have its personality set, labels changed, comms status checked and supply information about itself.  Displays for Power and Overload via the red LED. RDM data via the yellow LED and data in and input error via the green LED. The 10i/RDM has 6 personalities set via RDM:Personality 1Normal RDM SplitterPersonality 2Hold Last Frame:The splitter will retransmit the last valid frame in the event of data loss on the input. RDM requests and responses will still be passed through.Personality 3Clean Up All: The splitter will strip out any RDM data from the input data and only pass DMX level information. Personality 4Clean Up All + Hold Last Frame: As above but will hold the last valid frame on the input.Personality 5Clean Port On: Output ten will remove any RDM messages but pass through normal DMX. So devices that may misunderstand RDM messages as level information can be connected.Personality 6Clean Port + Hold Last Frame: As above but will hold the last valid frame on the input.

The XTBA Smart Splitter 4D is a 4 way DMX splitter housed in a DIN rail case for ease of installation. Ideal for LED installations as it can be supplied mains powered or from 24 to 48 volts DC. The input is optically isolated from the four outputs giving protection against ‘sordid unpleasantness’ or ‘nasty frightfulness’ that may end up on a DMX data line (most often with led luminaries) forcing the DMX controller into an early retirement.Specifications Smart Splitter 4D DIN railLength: 70.00mm120v AC (90v - 140v)240v AC (190v - 250v)24v - 48v DC optionWeight: 0.15Kg (approx)DIN Rail MountingWhite

The XTBA Smart Splitter 5D/RDM is a single input, five output DMX and DMX-RDM data splitter. Opto isolation is provided between the input and the five outputs. Mains powered (or low voltage DC for LED systems) and housed in a D case for compact installations.Along as being a standard DMX splitter the 5D/RDM is a fully functional RDM splitter allowing the distribution of RDM requests and responses from its 5 outputs and input.Output MonitoringA potential problem with RDM is that any short or overload on any responder can cause the entire RDM system to fail. The 5D/RDM will monitor the five outputs and block any shorted or overloaded outputs thus protecting the network.The 5D/RDM monitors all RDM traffic and will block incorrectly formatted request messages. As well as distributing RDM traffic the Smart Splitter 5D will function as a RDM device itself. So it is discoverable and can have its personality set, labels changed, comms status checked and supply information about itself.       RDM Clean UpThe splitter has three personalities set via RDM. Standard RDM splitter. Clean Port, in which output 1 will remove all RDM requests to allow legacy DMX equipment to be connected so RDM data is not confused with DMX level data. Clean Up All in which all RDM data is removed from the outputs.  Displays for Power and Overload via the red LED. RDM data via the yellow LED and data in and input error via the green LED. The 5D will also display status and errors on power up via the LEDs.Specifications Smart Splitter 5DLength: 105.00mm120v AC (90v - 140v)240v AC (190v - 250v)120/230VAC or 9V to 48V DC dependant on unit typeWeight: 1.75Kg (approx)DIN Rail MountingWhite

XTBA's SMART SPLITTER 5i offers 5 fully optically isolated and buffered outputs, with over voltage data line protection.The data loop-through is fully terminated and the data loop out is a retransmitted copy of the input with relay overide, so data will pass through in the event of power failure.Specifications Smart Splitter 5iLength: 430.00mmDepth: 270.00mmHeight: 44.00mmWeight: 4.00Kg (approx)120v AC (90v - 140v); 120V Operation is internally selectable240v AC (190v - 250v)19" 1U Rack MountBlack