Relais 4 x 8A
The 3204R-H features high-power changeover contacts (NO/NC, 230V at 8 amps resistive load). This makes the 3204R-H a suitable tools for all your switching needs: high power, low power, audio or lighting signal, motor control or more. Intelligent internal signal routing, exclusive switching options, momentary or latching output: every combination is possible and can be set easils from your preferred RDM controller.
In contrary to applications on stage, permanent installations do not need address setting switches etc. All settings are stored in nonvolatile memory electronically. Configurable parameters include:- the DMX start adress
- the DMX personality (upper and lower trigger intensity)
- channel allocation
- DMX HOLD mode … and more
To configure the relay 3204R-H, you need a suitable DMX RDM controller. To set start address and personality, a start address board 3000P, 3003P, 3005P or 3006P can be used alternatively. This is available as optional accessory and is not contained with delivery.
Specifications DMX Relais 3204R-H
- 4-channel
- DMX512/1990, DIN 56930-2, DMX512-A, ANSI E1-20 DMX RDM
- 2 switched outputs (N.O./N.C.) 230V 8A resistive load
- 4 trigger level combinations selectable
- Exlusive mode selectable*
- Monostable Mode selectable*
- Power supply: 24.0VDC, approx. 100mA**
- Dimensions: DIN rail, approx. 5 width units
*=DMX RDM controller required for configuration
**=no address board connected, all relays ON
Login